Step 4: Disconnect the old router and connect the new router back to the modem, then connect the computer to the new router and login to the web interface. Step 5: Click Advanced->Network->Internet, choose Use Custom MAC Address and type in the MAC Address you checked on the old router. Step 6: Click Save to save the settings. , and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Network > Dynamic DNS . 3. Select the DDNS Service Provider : TP-Link, NO-IP or DynDNS. It is recommended to select TP-Link so that you can enjoy TP-Link’s superior DDNS service. Otherwise, please select NO-IP or DynDNS. MU-MIMO permite routerului Archer C6 să servească simultan mai multe dispozitive, astfel toate dispozitivele își obțin datele mai rapid, iar Wi-Fi-ul este utilizat mai eficient. Router tradițional. Transmite date pe rând, către un singur dispozitiv. Archer C6. Transmite date simultan către multiple dispozitive Note: 1. This FAQ is suitable for TP-Link wireless router with cloud functions, such as Archer C8 V3, Archer C9 V3/V4 and so on. If your TP-Link router doesn’t support cloud functions, you can neither bind a TP-Link cloud account to it nor manage it remotely although you have signed up. Go through this FAQ to set up the TP-Link router. Connect the TP-Link router together with Gen-1 Starlink router; On this network topology, please connect the TP-Link router to the AUX port of the Gen-1 Starlink Router. To avoid double NAT, it is suggested to change the TP-Link router into Access Point mode. Follow this guide to change the TP 1) Go to Advanced > System Tools > System Parameters and focus on the 2.4GHz Wireless section, click Enable WDS Bridging. 2) Click Survey, locate the root router’s SSID, and click Choose (Here we take TP-Link_4F98 as an example). 3) If the root router has a wireless password, you should enter the wireless password of the root router. Click Save to save the configuration. Click Restart for the changes to take effect. In the screenshot below, you can see that some high-end models of TP-Link routers like Archer 3200 have a 2.4 GHz hotspot and even two hotspots that work in the 5 GHz band. You can choose which of the three networks you want to use or switch off: Step 4. In this mode, your router connects to a wired or wireless router via an Ethernet cable and extends the wireless coverage of your existing network. Advanced functions like NAT, Parental Controls, and QoS are not supported in this mode. Step 1: Log in the web interface page of TP-Link router by referring to How do I log into the web-based Utility (Management Page) of TP-Link wireless router? Step 2: Click Quick Setup. After selecting your Time Zone, you’ll see the Internet Connection Type Page. Then click Additional ISP Settings to open the option. AC1200 Dual Band WiFi Meets Your Smooth Network Needs. The Archer C64 allows you to connect more devices and stream simultaneously with its dual 2.4GHz and 5GHz bands. The 2.4GHz band provide reliable connections for sending emails, web browsing and other simple tasks. The 5GHz band delivers speed up to 867Mpbs, great for media-intense U8m0gcr.